RAINBOW BUTTERFLIES CARD 13

Card 13 using the new Rainbow Butterflies Digikit.

You will need a graphics programme such as CAP2 or MCS to make this card.

This card uses Rainbow Butterflies set 9.

 

1:   Create a dark turquoise square approx. 13 cm x 13 cm. in your graphics programme.

2:   Import the embossed paper, re-size and position it over the turquoise square.

3:   Import the textured paper, re-size it to approx. 9.5 cm x 9.5 cm. and position it in the centre of the

      card.

4:   Import the button, re-size to approx. 1.5 cm diameter and position in the centre of the card.

5:   Import the flower and re-size to approx. 1.5 cm diameter. Copy and paste until you have 12 flowers

      and position them as illustrated. You can do this by eye or draw lines at 45 degree angles across

      the card.

6:   Print your design on to good quality card.

7:   Import the butterfly, re-size to approx. 2.75 cm across. Copy, paste and rotate and position them

      in between the flower lines.

8:   Remove the card so you are left with just the butterflies and print the 4 on to acetate.

9:   Cut the butterflies out and glue to the card.

10: Add peel-offs, glitter etc. if wished.